Heating Cutter, Hot knife

Storage Notes of EVA Film

*EVA Film should be stored in the place: ventilation, dry, clean.
*EVA Film storage should avoid:
Sunlight
Heat source
Water or rain
*If EVA Film in storage absorbs too high temperature heat, the EVA Film may be adhere to each other inside the rolls. If EVA Film in storage absorbs too much moisture, the EVA Film may turn to yellow and the adhesion is getting weak.

*If the EVA Film is packed by plastic skin in rolls, put pallet under the EVA Film to isolate the EVA Film from the ground. And don’t pile up more than 3 layers. If the EVA Film is packed by plywood case, then you can directly pile up 5 layers of plywood cases.

*Please note that the EVA Film should not store together with the tinderbox, or inflammable to explosive articles.
*When using EVA Film, following the rule: First in, First out.
*Don’t storage EVA Film for more than 12 months.

EVA Thermal Cutter
to clean laminated glass edges overflowed remains of EVA, PVB, SGP etc.
Application:
When making laminated glass with EVA film(or PVB film, SGP film) there may be some overflowed EVA remains (or PVB remains, SGP remains) on the edges of laminated glass after heating in the oven, EVA Thermal Cutter is the handhold tool to clean the laminated glass edges remains easily.

How it work:
The blade of the EVA Thermal Cutter can be up to 500℃ in seconds. The EVA Thermal Cutter use the ultra high temperature heat to cut the EVA remains (or PVB remains, SGP remains) of the laminated glass edges.

The EVA Thermal Cutter cleans the overflowed remains NOT by strength or sharp, but by Ultra High Temperature Heat: 500℃. So whether the interlayer film is EVA FILM, PVB FILM, or SGP INTERLAYER, the result is the same.

Data:
CE Plug: AC 230V/50HZ
US Plug: AC 120V/60HZ
Temperature of Blades: Up to 500 ℃ in in approx 5-7 seconds
Thermal Cutter is available in 4 shapes of blades to remove the remains of laminated glass edge.

Comments from Our Clients:
*Comment1:
Peter,
The Thermal Cutters were received 10/9, in the afternoon. I have already used them and they work great. Much better than the method I was using before.
*Comment2:
Dear Olivia,
My people are very happy with the cutting tool.
*Comment3
Peter,
Yes, we received the cutters. We have already been using them and they work very nicely.Thank you for your help.
*Comment4
Dear Olivia,
We have good result with EVA thermal cutter, my colleague will contact you to place new order.

CNC Glass Interlayer
www.cncglass.com www.c-n-c.com
[email protected] [email protected]
Product 1]Super Clear EVA Film for safety laminated glass
Product 2]Milky White EVA Film for safety laminated glass
Product 3]Green Tape and Thermal Cleaning Cutter for EVA film safety laminated glass glazing