Heating Cutter, Hot knife

Green Tape for safety glass laminating, EVA FILM, PVB FILM, SGP FILM

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

GREEN TAPE is to perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating(the GREEN TAPE is High temperature resistance).
003 Green Tape Preventing Melt Eva Film Over Flowing Out of Laminated Glass Edges

What is the specifications of CNC GREEN TAPE?
25mm*66M/roll
30mm*66M/roll
35mm*66M/roll
40mm*66M/roll
50mm*66M/roll

If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, will the GREEN TAPE prevent the de-airing vacuuming? do we need to make some holes on the CNC

GREEN TAPE for vacuuming the air out?

It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don’t need to make holes on the CNC GREEN TAPE, so you can get the cleaner result of the edges of the

final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it’s better you make some holes on the CNC GREEN TAPE to help pre-laminated glass

vacuuming.

Does CNC GREEN TPAE leave glues on the glass?
NO! No left remains of CNC GREEN TAPE on glass surface after peeling off. CNC GREEN TPAE can stand continuously heating more than 180℃with strong tear resistance.

CNC Glass Interlayer
www.cncglass.com www.c-n-c.com
[email protected] [email protected]
Product 1]Super Clear EVA Film for safety laminated glass
Product 2]Milky White EVA Film for safety laminated glass
Product 3]Green Tape and Thermal Cleaning Cutter for EVA film safety laminated glass glazing

EVA Thermal Cutter
to clean laminated glass edges overflowed remains of EVA, PVB, SGP etc.
Application:
When making laminated glass with EVA film(or PVB film, SGP film) there may be some overflowed EVA remains (or PVB

remains, SGP remains) on the edges of laminated glass after heating in the oven, EVA Thermal Cutter is the handhold tool to clean the laminated glass edges remains easily.

How it work:
The blade of the EVA Thermal Cutter can be up to 500℃ in seconds. The EVA Thermal Cutter use the ultra high temperature heat to cut the EVA remains (or PVB remains, SGP remains) of the laminated glass edges.

The EVA Thermal Cutter cleans the overflowed remains NOT by strength or sharp, but by Ultra High Temperature Heat: 500℃. So whether the interlayer film is EVA FILM, PVB FILM, or SGP INTERLAYER, the result is the same.

Data:
CE Plug: AC 230V/50HZ
US Plug: AC 120V/60HZ
Temperature of Blades: Up to 500 ℃ in in approx 5-7 seconds
Thermal Cutter is available in 4 shapes of blades to remove the remains of laminated glass edge.

Comments from Our Clients:
*Client 1:
Peter,
The Thermal Cutters were received 10/9, in the afternoon. I have already used them and they work great. Much better than the method I was using before.
*Client 2:
Dear Olivia,
My people are very happy with the cutting tool.

CNC Glass Interlayer(China)
www.cncglass.com www.c-n-c.com [email protected] [email protected]

Mesh for Silicone vacuum bag, in EVA Film safety glazing